High & Low Differential Reading

Many conditions will involve tissue areas of both high and low readings. For example disabled patients suffering with spastic, athetoid, dystonic and choreiform muscular problems will present both high an low reading on their limbs depending on the amount of circulation and nerve energy levels in any given muscle group. This is the same for stroke patients with paralysis, some muscles will be under tension with excessive energy and other muscle groups will be with a very low level of energy, possessing no tension or feeling. Using The Infrared Bioscanner in conjunction with gem lamp treatment, such differential can be addressed, giving rise to a considerable improvement for the patient’s mobility.

Specifications

Powered: by four 1.5 Volt Alkaline Batteries Size: AA, RX6, or HP7.

Operating Voltage is 6.0 Volts, Current Consumption is 70 mA. Power consumption is 420 milli-Watts.

The instrument is protected against accidental reverse battery installation.

Battery Life:

a) Alkaline Batteries will provide between 20 and 40 hours of service depending on the brand.

b) Rechargeable nickel cadmium batteries will provide approximately 17 hours of use.

c) Rechargeable metal hydride batteries will provide between 17 and 30 hours of use.

d) Zinc chloride batteries although not recommended, will provide 6 or more hours of use.

Electromagnetic Spectrum Response

The Scanner is sensitive to wavelengths between 8 and 14 micrometers or frequencies between 3.75 x 1013 & 2.14 x 1013 HZ). At this wavelength window, gases such as carbon dioxide do not affect the accuracy of the reading.

Response Time

Very fast Sampling Response Time of typically a quarter of a Second (0.250 Seconds).

Range & Calibration Accuracy.

Typically 3.0% of Full Scale Meter Reading on all five ranges. This provides differential readings of great accuracy and on the most sensitive range the reading can be determined down to a twentieth of a degree Celsius. The meter is calibrated in degrees Celsius via a ‘Centre Zero’ Moving Coil Meter.

Calibrated in Four Ranges of Sensitivity: Modes of Function: The Scanner has two modes of measurement.

A. +40 Zero -40 ^OC. Differential Temperature Measurement Mode.

B. +10 Zero -10 ^OC Differential Temperature Measurement Mode.

C. +4.0 Zero -4.0 ^OC. Differential Temperature Measurement Mode.

D. +1.0 Zero -1.0 ^OC. Differential Temperature Measurement Mode.

E. Zero -10.0 Zero to +40 ^OC. Standard Temperature Measurement Mode: Temperature is referenced against Zero degrees Celsius.

To E-Mail us, please click here: whalemedicalinc@aol.com

<< Previous    1  2  [3]  4    Next >>